The quietest system! No vibrating or buzzing ballast and no buzzing and / or chattering relay (free on / off switch).
Dimlux Xtreme Series Electronic Ballast 230V
Dimlux is the producer of high-performance electronic ballast. The Dimlux Extreme ballast 600 watts at 230 volts is to use as loose ballast but even more effective when it is switched via the Maxi Controller.
Due to the circuit via the Maxi Controller Dimlux has some unique features that makes the intervention of various devices unnecessary, as you can through the Maxi Controller:
- The Dimlux boosts up to 660W, the highest output that is currently available for 600W transformers
- The Dimlux can be dimmed in percentage between 35% and 100%
- Both 400 watt and 600 watt lamps runs at the same Dimlux and Maxi Controller
- Set Thermal protection for the Dimlux
- Sun rise and fall mimic
In short Dimlux is a unique brand in the field of assimilation lighting, with some unique very useful features. The Dimlux 230V is also the strongest 600W electronic ballasts currently available.
The Dimlux features diagnostic LEDs. This one immediately sees that the ballast is on, standby or failure and what kind of trouble it is.
Fireproof !!! The built-in processor monitors the connection between the ballast and the lamp will shut down the ballast and continuously to a poor contact or short circuit. Normally a ballast continues starting 5000V (with voltages of this size materials so hot that even metal smelting).
In a normal ballast collapses to a lower power supply automatically, the light output with it. For example, if you have 220V power supply instead of 230V, the light output by 11%. Because the Dimlux voltage increases to 230V electronically, you always have a stable and high light output.
The power consumption of the Dimlux s with always the same. In a normal ballast decreases over time to the current consumption while the light output decreases, thus the efficiency drops quickly added. The current consumption can rise to 4-5A continuously for a 600w lamp (this is the same as a 1000w lamp consumption) The wiring is not calculated at several vsa's generally at these high currents causing fire hazard.
The quietest system! No vibrating or buzzing ballast and no buzzing and / or chattering relay (free on / off switch).
The highest output of all 400/600watt EBs by overdrive technique (Lumen Boost)
- The dim largest range of all electronic ballasts
- Continuously dimmable instead of steps
- Suitable for 400 and 600w bulbs, choose need not (useful for beginners) so
- Suitable for sea MH and HPS lamps
The Dimlux features diagnostic LEDs. This can be seen directly or ballast, standby or failure and what the fault is concerned.
Fireproof!! The built-in processor monitors the connection between the ballast and the lamp will turn off the ballast and continuously at a bad contact or short circuit. Normal remains a ballast by starting with 5000V (with voltages of this size materials so hot that even metal smelting).
In a normal ballast collapses to a lower power supply automatically the light output with it. For example, if you have 220V instead of 230V supply voltage, the light output by 11%. Because the Dimlux electronically increases the voltage to 230V always have a stable and high light output.
The power consumption of the Dimlux s with always the same. In a normal ballast increases with time while the recorded current to the light output decreases, so the extra efficiency decreases rapidly. The current consumption can be up to 4-5A continuously for a 600w bulb (this is the same consumption as a 1000w lamp) The wiring with multiple ballasts are generally not designed for these high currents causing fire hazard.