SMS Hybrid Controller 16A
Hybrid Controller uses a computer-controlled temperature sensing technology, combined with a mechanical system to regulate the speed of the fans. It is designed to maintain a constant room temperature and to keep the air flow. At all times under the control It is the ideal solution if you are looking for the quietest exhaust fans, looking as we GUARANTEE that this type of fan is not buzzing or humming!
Once you have set the desired temperature and the minimum speed of the fans Hybrid Controller automatically creates the perfect climate by regulating. Automatically adjust the speed of the fans in 5 steps The negative pressure is ensured by the perfect synchronization of both fans.
Hybrid Controller works with plug-and-play. You no cables required. Just connect your fans, set the desired temperature and the minimum speed of the fans and the Hybrid Controller does the rest. Max. capital ** Hybrid Controller 2 A 2 A or 450 W
Max. capital ** Hybrid Controller 4 A: 4 A or 900 W
Max. capital ** Hybrid Controller 8 A: 8 A or 1800 W
Max. capital ** Hybrid Controller 16 A: 16 A or 3,600 W
** Total maximum wattage that the entire device can deliver. Either divided between sockets or a single outlet.
Hybrid Controller switch:
The controller will automatically choose between 5 different speeds to maintain. Your set temperature
Place the controller in a suitable location and place the temperature sensor in the middle of the room. Place the temperature sensor in direct sunlight or in the cool incoming air from the ventilation system, as this will lead to erroneous measurements.
Connect the air supply fan on the left and the exhaust fan to the right of the controller.
Connect the controller to a power outlet and turn it on.
Set the desired temperature using button 1.
Set the minimum speed of the fans ** with button 2.
The controller will automatically set the speed of the fan speed between 1 and 5.
Adjust the speed of the fan speed manually in between 1-5.
Set button 1 to the highest value (45 degrees).
With button 2 you can now manually adjust the speed between speed 1 and - 5 You can only use the manual setting if the ambient temperature of the room is 45 ° C or lower.
Hybrid Controller uses a heavy relay power control when the controller switches between different speeds. You will have a small "click" sound when the relay switches between speeds. The heavy relay ensures that the controller is robust and works reliably.
Minimum speed of the fans **. When you set the minimum speed of the fans in the automatic mode on the Hybrid Controller, set the range in which the regulator should work. You do not put the fans immediately that speed example, when the controller is set to speed 1, it will automatically adjust the speed of the fan speed between 1 and 5 in order to keep the temperature constant. When the controller is set to speed 2, it will operate between 2 and 5 speed etc.., We recommend to set the minimum speed of the fans at first, since this provides the greatest working range for the controller.