Vents TT Pro 160 RV Mixed-Flow Fan Ø160mm / 415m³ + 565m³

Vents TT Pro 160 RV Mixed-Flow Fan Ø160mm / 415m³ + 565m³

The Vents TT and Vents TT PRO fans are specifically designed for supply and exhaust ventilation of buildings that require high pressure, powerful air flow and low noise. For example, the fans are ideal for the ventilation of bathrooms, kitchens and other damp rooms, as well as for ventilation of apartments, houses, shops, cafes, and so on.

The Vents TT PRO 160 RV Mixed-Flow Fan is equipped with a single-phase, powerful motor with a low energy requirement and has a thermal overheating protection to prevent overloading of the motor. Thanks to the ball bearings, the service life of the engine has been extended to 40,000 hours for non-stop use.

In addition to a very powerful engine, the PRO version has an optimized design with a housing made of low flammable polypropylene. In addition, the inlet is equipped with a collector to enable smooth air intake to the fan. The impeller in the form of a hemisphere and blades with profile increase the circular speed of the air flow and offer a higher pressure and capacity compared to standard axial fans. Finally, the diffuser, impeller and target blades at the outlet of the fan housing ensure that the air flow is distributed in such a way that the best combination of high performance, increased pressure and low noise level is achieved.

With the built-in switch you can control the speed of the fan (option V). It is also possible to use an external switch for this and to expand the possibilities by connecting a timer with an adjustable switch-off delay. Both are available separately.

After loosening a number of clamps, the impeller and the engine block are removable. This makes maintenance of the fan quick and easy. A complete dismantling is not necessary. You simply remove the central block from the housing and you can perform the required maintenance.

The fan can be installed at any point and in every corner of the ventilation system. Installing multiple fans within one system is no problem. Also handy: the fan is supplied including cord and plug.

Specifications

• Type: outlet, supply
• Frequency: 50/60 Hz
• Voltage: 230 V
• Energy consumption: 42-50 W
• Current: 0.19-0.22 A
• RPM: 1940-2620
• Maximum air capacity: 415-565 m3 / h
• Sound pressure level at 3 m: 37-46 dB
• Spigot size: 160 mm
• Weight: 3.25 kg
• Assembly: inline
• Protection class: IP X4